Copyright MMX Kleenrite, Inc.
All rights reserved.
Home | Featured | Kleenology | Distributors | Downloads | Contact Us
Highlight® No-rinse Stripper is a fast-acting, low-odor formula designed for the removal of floor finish polymers, waxes and undercoater sealers. This low-foaming product has exceptional penetrating properties to break down and liquefy extremely heavy, hardened build-up for easy mopping or vacuum removal.
DILUTIONS
Light:             1 part with 3 parts of water.

Heavy:          1 part with 1 part of water.
DIRECTIONS
  1. Shake gently before use. On linoleum, marmoleum or asphalt tile, always test before use.
  2. Apply No-rinse Stripper liberally and uniformly with a mop onto an area no larger than 15 ft2 (1.4 m2) at a time.
  3. Allow solution to dwell for 3 to 5 minutes. For best results, proceed using a rotary floor machine with a stripping pad, or agitate with the stripping mop.
  4. Thoroughly remove emulsified finish with mop or wet-dry vacuum. Rinse floor with a clean mop using fresh water.
  5. Floor should be dry before appling Highlight® SealerFinish.
TECHNICAL DATA
pH at use dilution 12.75
Odor lemon
Flash point, ¾F (¾C) none
DOT restrictions Class 8, PGIII
Freeze/thaw stable yes
VOC compliant yes
Shelf-life, years 5+
AVAILABLE SIZES
US gallon   .   55-gallon drum
ADVANTAGES AND USES
  • Fast-acting; hyper-penetration.

  • Liquefies and suspends the oldest, toughest, hardest floor finish for easy removal.

  • Low-foaming; compatible with wet-dry pick-up.

  • Does not leave a high alkaline residue that would interfere with floor finish adherence.

  • Excellent on most hard floor surfaces, such as asphalt tile, brick, ceramic tile, concrete, linoleum, non-glazed saltillo, quarry tile, rubber, sealed wood, terrazzo, vinyl and VCT.

  • User safe. VOC compliant.
CUSTOMER INFORMATION
Pleasant lemon odor; does not contain ammonia.

Does not contain phosphates.

Will not damage floor or stone surfaces.

Nontoxic. Biodegradable.
[ supermarket ] [ office building] [ airport ]