has been formulated to protect suede,
nubuck and any “absorbent type”
leather. Developed specifically for these
hard to maintain leathers, this solvent
base product will provide significant
protection against both oil and water
base stains. This product does not contain
PFOS or PFOA found in other protectors.
Do not dilute. This product is ready-to-use.
For use on suede, nubuck or any “absorbent
type” leather only. Do not use on protected
or topcoated leather. See LeatherPlus®
Cleaning Guide for further instructions.
Shake gently before use.
Always test before use (see LeatherPlus®
Apply with a trigger or low pressure sprayer
(less than 40 psi); do not use an electric
sprayer. Lightly spray directly onto clean
leather surface, using overlapping passes
to ensure uniform coverage.
Allow to dry for 24 hours before use.
Full cure protection will be complete in
48 - 72 hours.
pH at use dilution
foot (290 ml/linear meter
ADVANTAGES AND USES
Safe for use on suede, nubuck and all
“absorbent type” leather.
Advanced flouropolymer technology; does
not contain silicone.
Reduces evaporation of natural oils found
in leather, thus maintaining it’s
resilient and supple texture.
Protects against fading.
Increases resistance to abrasion and wear.
Does not contain PFOS or PFOA.
Does not leave soil-attracting residue.
Penetrates leather to protect against
oil and water base stains.